Exterior cleaning specialists in TorquayCall 01803 424114
SAS Window Cleaning
SAS Window Cleaning · Our work — SAS exterior cleaning

SAS Window Cleaning · Our work

Block paving cleaning in progress

Dark driveway deposits being removed outside two garages, with a lighter cleaned section alongside paving still awaiting washing.
  • ✦ 30+ years' experience
  • ✦ Fully insured
  • ✦ 80+ 5★ reviews
  • ✦ Free quotes

Get a free quote

Fast, friendly, no-obligation pricing.

Prefer to talk? Call 01803 424114.

Block paving cleaning in progress — Cleaning in progress
Cleaning in progress

Block paving outside two garages is being cleaned in sections. A clear dividing line separates dark deposits from the lighter blocks already washed, making the herringbone pattern and the mix of colours more distinct on the completed section.

A rotary surface cleaner is commonly appropriate for sound block paving because it covers open areas consistently. SAS first considers block stability, joint depth and any particular stains, then selects pressure that suits the paving. Perimeter work and final rinsing need attention alongside the centre.

This is work in progress, not evidence of a finished driveway or subsequent sealing. Where washing leaves joints low, re-sanding can be agreed and carried out in suitable dry conditions. Oil marks and damaged blocks need their own assessment; cleaning alone cannot restore every defect.

The surface

Surface grime concealed much of the colour on the herringbone-pattern blocks.

Our usual approach

For suitable block paving, SAS normally uses controlled surface cleaning, careful rinsing and separately agreed joint re-sanding when needed.

Visible condition

The cleaned section has clearer block colours; the rest of the driveway remains unfinished.

About our patio & driveway cleaning

Planning a similar block paving clean

This record shows work in progress, with no evidence of a finished driveway transformation. For a similar project, the useful planning question is how the whole area will be assessed and completed, not simply how pronounced a cleaned strip appears. Wetness, viewing angle and surface condition can all influence the contrast visible during washing.

Around garages, inspect block stability, joint depth and thresholds before choosing a cleaning approach. Note puddling, sunken wheel tracks and any marks associated with parked vehicles. Cleaning can reveal the block colours but will not correct settlement or necessarily remove absorbed oil. Previously applied sealers should be identified where possible because they can affect the proposed process.

Understanding methods and progress on similar paving

A surface cleaner can cover suitable open block paving consistently, while garage-door edges and boundaries need separate attention. The pressure and working distance must respect the blocks and their joints. Keeping water away from vulnerable thresholds may require a different sequence from working across an unrestricted open drive, especially where drainage capacity is limited.

Joint replenishment should be discussed as a distinct part of the scope where needed. Conventional kiln-dried sand requires suitable conditions, so its timing should not be inferred from a photograph of washing underway. Nor does a clean section establish that sealing, stain treatment or any other finishing operation will follow once the remaining paving has been washed.

Preparing a similar garage-front enquiry

Send an overall view of the garage frontage and close photographs of joints, stains and door thresholds. Explain parking needs, vehicle movements and whether either garage must remain usable. Include tap and drain locations, shared boundaries and any stored items that restrict access. These practical details help establish the work sequence before equipment arrives on site.

Ask what completion will include: edges, final rinsing, debris collection and any separately agreed joint work. Repairing movement, replacing damaged blocks and sealing are not automatic additions. Clarify when normal traffic can resume. This guidance applies to comparable paving only and does not claim that any of those later stages occurred in the progress image shown here.

How we approach this type of job

Block paving needs assessment of both the blocks and the material between them. Check for rocking sections, shallow joints and areas that have settled before washing; cleaning cannot correct movement or poor drainage. A herringbone layout can collect grime in joints, and oil or tyre marks may respond differently from general dirt. For sound paving, controlled rotary cleaning can give consistent coverage across open areas, with more directed work at edges and around obstacles. Pressure should be set for the condition of the blocks, not increased simply to chase a stubborn mark. Rinse away loosened material carefully. If jointing needs replenishment, discuss it separately and allow for suitable dry conditions.

Is your property similar?

If block colours look muted beneath grime, green growth fills the joints, or the drive becomes slippery when wet, a clean may be worth considering. Mention rocking blocks, low joints, oil spots and drainage issues when requesting advice. We can assess the cleaning area and explain whether joint re-sanding is included in the agreed scope. Get in touch for a free, no-obligation quote.

Explore our patio & driveway cleaning serviceRequest a free quote

Contact us

Get your free quote today

Need a quote or have a question? Call, WhatsApp or send us a message — we're open 24 hours, 7 days a week and always happy to help.

Areas covered

Torquay & surrounding areas

Opening hours

Open 24 hours, 7 days a week

Get a free quote

Fast, friendly, no-obligation pricing.

Prefer to talk? Call 01803 424114.

Accredited, insured & trusted by Torquay

  • SafeContractor approvedSafeContractor approved
  • PASMA trainedPASMA trained
  • Google reviews★★★★★5★ Google reviews
  • Facebook reviews★★★★★5★ Facebook reviews
  • CheckatradeCheckatrade